Qingdao Fullwin Machinery Co., Ltd.
Mini Excavator, Full Energy, You will become a Big Winner!
Add to Cart
Wholesale EPA Cheap Diesel/Gasoline Crawler Wheel Tracked Mini Loader
Quick Detail:
1. Powerful Engine, KOOP diesel engine/Euro V engine/EPA certified gasoline /Kubota engine for your choices;
2. Adopt famous hydraulic Shut-off valve;
3. The boom and the bulldozer oil cylinder are equipped with high-strength cast steel protective plates;
4. Dig-to-blade and dozer float features are easy to clean up;
5. Strong lift and dig performance helps you to get the job done faster;
6. Auger, grab, hydraulic hammer, narrow bucket can be installed;
7. Hydraulic pilot operation is more flexible and convenient.
Specifications:
| DIMENSIONS | |
| Angle of Departure | 19° |
| Carry Position | 206 mm |
| Dump Angle @ Maximum Height | 36° |
| Dump Height with Standard Bucket | 1272 mm |
| Dump Reach @ Maximum Height | 815 mm |
| Ground Clearance | 159 mm |
| Ground Clearance-under platform | 180 mm |
| Height to Bucket Hinge Pin | 1883 mm |
| Height | 1352 mm |
| Length without Attachment | 1976 mm |
| Length with Standard Bucket | 2637 mm |
| Operating Height | 2649 mm |
| Rollback @ carry | 22° |
| Rollback Fully | Raised |
| Maximum | 94° |
| Ground Contact Length | 918 mm |
| Turning Radius with Standard Bucket | 1593 mm |
| Width | 1104 mm |
| Wheel Tread (over | 904 mm |
| Width with 36" Bucket | 1250 mm |
| Operating Capacity (35%) | 291 kg |
| Operating Capacity (50%) | 416 kg |
| Tipping Capacity | 832 kg |
| Weight (no attachment) | 1069 kg |
| Travel Speed | 5.6 km/h |
| Make/Model | Kubota // D1105-EF02 |
| Fuel/Cooling | Diesel/Liquid |
| Horsepower (SAE Gross) | 18.2kW |
| Maximum Governed RPM | 3000 RPM |
| Torque @ 2200 RPM (SAE Net) | 71.5 Nm |
| Number of Cylinders | 3 |
| Displacement | 1.1L |
| Bore/Stroke | 78mm/78.4 mm |
| Fuel Consumption | 6.1 L/h |
| Lubrication | Gear Pump Pressure |
| Crankcase Ventilation | Closed |
| Air Cleaner | Dry replaceable cartridge with safety element |
| Ignition | Diesel-Compression |
| Engine Coolant | Propylene glycol/water mix (53%-47%) with freeze protection to -37°C Starting Aid |
| Starting Aid | Glow plugs |
| Alternator | Belt Driven; 40 amps; Open |
| Battery | 12 V；45Ah |
| Starter | 12 volt；Gear Reduction Type；1.4 kW |
| Pump Type | Engine driven, Two Gear type |
Notices:
1. Inspection should be carried out before operation to confirm that there are no obstacles and other personnel within the moving range of the boom and bucket, and the operation can be started only after sounding the alarm.
2. When digging grooves, the slopes and soil should be placed according to the requirements of safety technical disclosure, and it is strictly forbidden to dig under the fuselage.
3. When loading the truck, it should be carried out after the transport vehicle is stopped, the bucket should be lowered as much as possible, and the vehicle should not be smashed. It is strictly forbidden for the bucket to go over the top of the cab of the car.
4. When walking, the arm should be parallel to the crawler, and the slewing mechanism should be braked. The bucket should be 1m away from the ground. The walking gradient shall not exceed the maximum allowable gradient of the machine, drive downhill at a slow speed, and it is strictly forbidden to slide in neutral gear. Turning should not be too hasty, and padding should be reinforced when passing through soft ground.
5. Before the operator can leave the cab, the bucket must be dropped and the engine turned off.
6. Do not lift materials with buckets.
7. When abnormal operation is found, it should be stopped immediately, and the operation can be continued after troubleshooting.
8. When the tire excavator is moving on a slope, the bucket should be turned to the side of the high slope.
9. When using an excavator to demolish a structure, the operator should analyze the collapse direction of the structure, and leave a space for the structure to collapse between the excavator cab and the demolished structure.
10. The excavator parking site should be flat and solid, and the traveling mechanism must be braked when stopping.
Applications:
The main uses of the excavator: in road construction projects to excavate trenches, in construction projects to excavate the foundation, in water conservancy projects to excavate ditches, canals and dredging rivers, in quarries, open-pit mining and other projects for the stripping and excavation of ore, etc.; in addition to gravel, coal and other loose materials can be loaded.
Operation: After replacing the working device, it can also be used for lifting, pouring, installation, piling, ramming and pile pulling.
Our Service:
We support OEM/ODM service, we have professional develop research department, like designs, colors, and also products all can be acceptable customized, we have 3 times supervise on quality control through production line before send out. And quality and service is our first principle of company.We keep 12 months warranty, beyond the warranty period, all spare parts offered to you with our cost price (not including freight).By the way, we support 24Hour customer service by email or phone. Please feel free to contact, we are willing to become your friend and business partner.
FAQ
Q1: Are you original manufacturer?
We are a professional manufacture , we have our own R&D team and sales team, we provide one-stop service.
Q2: What about the warranty time?
1 year or 2000 hours. We shoulder all costs during the warranty period, include the freight. And we also provide after-sales service support andagricultural technical support
Q3: What engine you can offer?
Optional Yanmar, Kubota, Brrigs&Sttraton engine,
Optional US EPA & Euro stage V engine
Q4: How can we ensure quality?
We have quality control sysmterm and also double check supervise team,
The final inspection is always carried out before shipment
Q5: What is your production time or delivery time?
Usually, we make merchandise inventory, if we have the products in stock, the delivery time is 5-10 days after receiving the deposit. If we don't have the products in stock, we will arrange the production right now, the delivery time will be 30-45 days,It depend on the order quantity.
Q6: What is your payment term?
Normally we can worked on T/T and support 30% payment in advanced and the other balance 70% can be paid against COPY B/L.
Q7: Do you support Customized service?
Yes, offer me necessary information, we provide custom-make service to meet different needs of global clients with different budgets.
Q8: Do you offer the accessories ?
Yes, we have many kinds of accessories for your choice and make the mini excavator in a wide usage and more effective.
Q9: How do you pack the machine if buy one unit?
Usually we pack the whole machine with the strong wooden crate.
Q10: What is your MOQ?
We support th small order and our MOQ is 1 unit
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.